USBP Door Models
Select One to View
 
 
United States Bullet Proofing Products: Doors

USSD 3000 - Forced Entry/Bullet/Blast Resistant Steel Door "Patent Pending" (Single or Double Door)

 
Half
View
Narrow
Opaque

The 3000 Series door is a blast, ballistic and forced entry steel door that has passed stringent DOS. It carries a 60 minute forced entry rating in addition to blast and ballistic capabilities. This door is available as a single door or as a double door, swinging or sliding configuration. Sidelights and transoms are also available.

 
Summary
  • Ballistics – Department of State Rifle Rating (7.62 and 5.56) UL 752 Levels 1-8, NIJ I, II-A, II, III-A, III
  • Blast – Exceeds GSA DOD (UFC) DOS
  • Forced Entry – Department of State 5, 15, and 60 minute ratings, ASTM F1233 and F476
  • Frame Size – 2 1/2" W x 5 1/2" D
  • Door Size – 3' x 7' with custom sizes available
  • Door Thickness – 3"
  • Glazing Thickness – 1/4" to 2 3/16"
  • Glazing is totally restrained within armor sheeting. Glazing does not protrude.
  • Applications – Interior or Exterior. Department of State overseas diplomatic facilities, power plants, dams, suspension bridge cable rooms, high security government facilities. Any location where an extremely high level of forced entry protection is required.
 
Details
  • The USSD3000 Door Series is shipped pre-hung, pre-glazed and factory assembled. Available with clamp-on or built-in configurations including viewer, louvers, gun ports and/or deal trays. May be used individually or assembled for guard booths, security closures, etc. The unit is available as a swinging or sliding door, interior or exterior application.
  • The USSD3000 Door Series is constructed as a full-flush type unit. Construction consists of steel plates and tubes. All joint connections are welded to provide a rigid assembly when installed. The door framing is constructed from extruded ballistic steel. Complimentary window construction allows for aesthetically uniform security application that is available in many style and finish options.
  • Standard door hardware: Heavy-duty continuous hinge, deadbolt locksets with thumb turns & cylinders, LCN closer. Numerous hardware options are available to meet access and security needs; please consult factory for further information.
  • Style options: Half-vision, opaque, view-vision, sidelites, transoms, man-trap configuration.
  • Standard door size: 3’ x 7’ (custom sizes available)
  • Standard frame: 2 ½”W x 5 ½”D (custom sizes available)
  • Door Weight: varies per application
  • Standard finish: Prime paint; custom colors, Kynar paint, aluminum, brass and stainless steel cladding are available.

It is recommended that the door be used in conjunction with protected wall and
window areas.

Each end user should determine the ballistic and forced entry threat to ensure the
correct product selection to meet and exceed security needs.

 
 
 
United States Bullet Proofing, Inc.
 16201 Branch Court* Upper Marlboro, MD 20774 * 800-363-8328 (toll free) * 301-218-7920 (phone) * 301 218-7925 (fax)
 Copyright 2005 United States Bullet Proofing, Inc

Bullet Resistant Steel Door : Washington, DC

Bullet Resistant Steel Door : Washington, DC

Bullet Resistant Steel Door : Washington, DC

Bullet Resistant Steel Door : Washington, DC

Bullet Resistant Steel Door : Washington, DC

Bullet Resistant Steel Door : Washington, DC

Bullet Resistant Steel Door : Washington, DC

Bullet Resistant Steel Door : Washington, DC

1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9